[Jan]

Hallo,

leider habe ich mir heute meinen Apache2 ziemlich verschossen.

Ich benutzte SuSe 10.0 und den Apache 2.0.
Weiß jemand, wie ich den Server wieder hinbekomm, ohne mein System neuinstallieren zu müssen?

Apache neuinstallieren hat erstmal nichts gebracht. Muss ich da irgendwas beachten?
Folgender Fehler beim starten:

dhcppc0:/home/malte # /etc/init.d/apache2 start
Starting httpd2 (prefork) Syntax error on line 135 of /etc/apache2/server-tuning.conf:
Invalid command 'BrowserMatch', perhaps mis-spelled or defined by a module not included in the server configuration

The command line was:
/usr/sbin/httpd2-prefork -f /etc/apache2/httpd.conf
                                                                     failed

[Jann Hendrik]

mal ins blaue geraten:
such mal in der httpd.conf nach BrowserMatch

ggf. ist dort eine falsche Einstellung?

[Jan]

Ja, wenn ich das auskommentier, kommt die Fehlermeldung, das "LogFormat" nicht stimmt, und wenn ich das auskommentier, erscheint der fehler, das "CustomLog" nicht gefunden werden kann, bzw keine Anweisung ist.
das kann ich allerdings nicht auskommentieren, da es bei jedem Startversuch erneuert reingeschrieben wird.

Das Neuinstallieren hat leider nichts gebracht, sodas ich glaub, das der Fehler nicht in den confs liegt, sondern irgendwo tiefer im System.

[robo47]

tjoa, 1) was hast du geändert? 2) poste vieleicht mal die komplette datei dass man sie sich anschauen kann, irgendwo ist wohl ein syntax-fehler

[Jan]

Zitat von httpd.conf

#
# /etc/apache2/httpd.conf
#
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs-2.2/> for detailed information about
# the directives.

# Based upon the default apache configuration file that ships with apache,
# which is based upon the NCSA server configuration files originally by Rob
# McCool. This file was knocked together by Peter Poeml <poeml+apache@suse.de>.

# If possible, avoid changes to this file. It does mainly contain Include
# statements and global settings that can/should be overridden in the
# configuration of your virtual hosts.

# Quickstart guide:
# /usr/share/doc/packages/apache2/README.QUICKSTART


# Overview of include files, chronologically:
#
# httpd.conf
# |
# |-- uid.conf . . . . . . . . . . . . . . UserID/GroupID to run under
# |-- server-tuning.conf . . . . . . . . . sizing of the server (how many processes to start, ...)
# |-- sysconfig.d/loadmodule.conf . . . . .[*] load these modules
# |-- listen.conf . . . . . . . . . . . . . IP adresses / ports to listen on
# |-- mod_log_config.conf . . . . . . . . . define logging formats
# |-- sysconfig.d/global.conf . . . . . . .[*] server-wide general settings
# |-- mod_status.conf . . . . . . . . . . . restrict access to mod_status (server monitoring)
# |-- mod_info.conf . . . . . . . . . . . . restrict access to mod_info
# |-- mod_usertrack.conf . . . . . . . . . defaults for cookie-based user tracking
# |-- mod_autoindex-defaults.conf . . . . . defaults for displaying of server-generated directory listings
# |-- mod_mime-defaults.conf . . . . . . . defaults for mod_mime configuration
# |-- errors.conf . . . . . . . . . . . . . customize error responses
# |-- ssl-global.conf . . . . . . . . . . . SSL conf that applies to default server _and all_ virtual hosts
# |
# |-- default-server.conf . . . . . . . . . set up the default server that replies to non-virtual-host requests
# | |--mod_userdir.conf . . . . . . . . enable UserDir (if mod_userdir is loaded)
# | `--conf.d/apache2-manual?conf . . . add the docs ('?' = if installed)
# |
# |-- sysconfig.d/include.conf . . . . . .[*] your include files
# | (for each file to be included here, put its name
# | into APACHE_INCLUDE_* in /etc/sysconfig/apache2)
# |
# `-- vhosts.d/ . . . . . . . . . . . . . . for each virtual host, place one file here
# `-- *.conf . . . . . . . . . . . . . (*.conf is automatically included)
#
#
# Files marked[*] are created from sysconfig upon server restart: instead of
# these files, you edit /etc/sysconfig/apache2



# Filesystem layout:
#
# /etc/apache2/
# |-- charset.conv . . . . . . . . . . . . for mod_auth_ldap
# |-- conf.d/
# | |-- apache2-manual.conf . . . . . . . conf that comes with apache2-doc
# | |-- mod_php4.conf . . . . . . . . . . (example) conf that comes with apache2-mod_php4
# | `-- ... . . . . . . . . . . . . . . . other configuration added by packages
# |-- default-server.conf
# |-- errors.conf
# |-- httpd.conf . . . . . . . . . . . . . top level configuration file
# |-- listen.conf
# |-- magic
# |-- mime.types -> ../mime.types
# |-- mod_autoindex-defaults.conf
# |-- mod_info.conf
# |-- mod_log_config.conf
# |-- mod_mime-defaults.conf
# |-- mod_perl-startup.pl
# |-- mod_status.conf
# |-- mod_userdir.conf
# |-- mod_usertrack.conf
# |-- server-tuning.conf
# |-- ssl-global.conf
# |-- ssl.crl/ . . . . . . . . . . . . . . PEM-encoded X.509 Certificate Revocation Lists (CRL)
# |-- ssl.crt/ . . . . . . . . . . . . . . PEM-encoded X.509 Certificates
# |-- ssl.csr/ . . . . . . . . . . . . . . PEM-encoded X.509 Certificate Signing Requests
# |-- ssl.key/ . . . . . . . . . . . . . . PEM-encoded RSA Private Keys
# |-- ssl.prm/ . . . . . . . . . . . . . . public DSA Parameter Files
# |-- sysconfig.d/ . . . . . . . . . . . . files that are created from /etc/sysconfig/apache2
# | |-- global.conf
# | |-- include.conf
# | `-- loadmodule.conf
# |-- uid.conf
# `-- vhosts.d/ . . . . . . . . . . . . . . put your virtual host configuration (*.conf) here
# |-- vhost-ssl.template
# `-- vhost.template



### Global Environment ################################################## ####
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests.

# run under this user/group id
Include /etc/apache2/uid.conf

# - how many server processes to start (server pool regulation)
# - usage of KeepAlive
Include /etc/apache2/server-tuning.conf

# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog /var/log/apache2/error_log

# generated from APACHE_MODULES in /etc/sysconfig/apache2
Include /etc/apache2/sysconfig.d/loadmodule.conf

# IP addresses / ports to listen on
Include /etc/apache2/listen.conf

# predefined logging formats
Include /etc/apache2/mod_log_config.conf

# generated from global settings in /etc/sysconfig/apache2
Include /etc/apache2/sysconfig.d/global.conf

# optional mod_status, mod_info
Include /etc/apache2/mod_status.conf
Include /etc/apache2/mod_info.conf

# optional cookie-based user tracking
# read the documentation before using it!!
Include /etc/apache2/mod_usertrack.conf

# configuration of server-generated directory listings
Include /etc/apache2/mod_autoindex-defaults.conf

# associate MIME types with filename extensions
TypesConfig /etc/apache2/mime.types
DefaultType text/plain
Include /etc/apache2/mod_mime-defaults.conf

# set up (customizable) error responses
Include /etc/apache2/errors.conf

# global (server-wide) SSL configuration, that is not specific to
# any virtual host
Include /etc/apache2/ssl-global.conf

# forbid access to the entire filesystem by default
<Directory />
Options None
AllowOverride None
Order deny,allow
Deny from all
</Directory>

# use .htaccess files for overriding,
AccessFileName .htaccess
# and never show them
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>

# List of resources to look for when the client requests a directory
DirectoryIndex index.html index.html.var

### 'Main' server configuration #############################################
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#
Include /etc/apache2/default-server.conf


# Another way to include your own files
#
# The file below is generated from /etc/sysconfig/apache2,
# include arbitrary files as named in APACHE_CONF_INCLUDE_FILES and
# APACHE_CONF_INCLUDE_DIRS
Include /etc/apache2/sysconfig.d/include.conf


### Virtual server configuration ############################################
#
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at
# <URL:http://httpd.apache.org/docs-2.2/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.
#
Include /etc/apache2/vhosts.d/*.conf


# Note: instead of adding your own configuration here, consider
# adding it in your own file (/etc/apache2/httpd.conf.local)
# putting its name into APACHE_CONF_INCLUDE_FILES in
# /etc/sysconfig/apache2 -- this will make system updates
# easier

Zitat von server-tuning.conf

##
## Server-Pool Size Regulation (MPM specific)
##

# the MPM (multiprocessing module) is not a dynamically loadable module in the
# sense of other modules. It is a compile time decision which one is used. We
# provide different apache2 MPM packages, containing different httpd2 binaries
# compiled with the available MPMs. See APACHE_MPM in /etc/sysconfig/apache2.

# prefork MPM
<IfModule prefork.c>
# number of server processes to start
StartServers 5
# minimum number of server processes which are kept spare
MinSpareServers 5
# maximum number of server processes which are kept spare
MaxSpareServers 10
# highest possible MaxClients setting for the lifetime of the Apache process.
ServerLimit 150
# maximum number of server processes allowed to start
MaxClients 150
# maximum number of requests a server process serves
MaxRequestsPerChild 0
</IfModule>

# worker MPM
<IfModule worker.c>
# initial number of server processes to start
StartServers 2
# minimum number of worker threads which are kept spare
MinSpareThreads 25
# maximum number of worker threads which are kept spare
MaxSpareThreads 75
# maximum number of simultaneous client connections
MaxClients 150
# constant number of worker threads in each server process
ThreadsPerChild 25
# maximum number of requests a server process serves
MaxRequestsPerChild 0
</IfModule>

# leader MPM
<IfModule leader.c>
# initial number of server processes to start
StartServers 2
# minimum number of worker threads which are kept spare
MinSpareThreads 25
# maximum number of worker threads which are kept spare
MaxSpareThreads 75
# maximum number of simultaneous client connections
MaxClients 150
# constant number of worker threads in each server process
ThreadsPerChild 25
# maximum number of requests a server process serves
MaxRequestsPerChild 0
</IfModule>

# perchild MPM
<IfModule perchild.c>
# constant number of server processes
NumServers 5
# initial number of worker threads in each server process
StartThreads 5
# minimum number of worker threads which are kept spare
MinSpareThreads 5
# maximum number of worker threads which are kept spare
MaxSpareThreads 10
# maximum number of worker threads in each server process
MaxThreadsPerChild 20
# maximum number of connections per server process
MaxRequestsPerChild 0

AcceptMutex fcntl
</IfModule>

# metux MPM
<IfModule metuxmpm.c>
# initial number of worker threads in each server process
StartThreads 5
# minimum number of worker threads which are kept spare
MinSpareThreads 5
# maximum number of worker threads which are kept spare
MaxSpareThreads 10
# maximum number of connections per server process
MaxRequestsPerChild 0

Multiplexer "wwwrun" "www"

</IfModule>


#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15

#
# EnableMMAP: Control whether memory-mapping is used to deliver
# files (assuming that the underlying OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. On some systems, turning it off (regardless of
# filesystem) can improve performance; for details, please see
# http://httpd.apache.org/docs-2.0/mod...tml#enablemmap
#
#EnableMMAP off

#
# EnableSendfile: Control whether the sendfile kernel support is
# used to deliver files (assuming that the OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. Please see
# http://httpd.apache.org/docs-2.0/mod...enablesendfile
#
#EnableSendfile off


#
# The following directives modify normal HTTP response behavior to
# handle known problems with browser implementations.
#
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0

#
# The following directive disables redirects on non-GET requests for
# a directory that does not include the trailing slash. This fixes a
# problem with Microsoft WebFolders which does not appropriately handle
# redirects for folders with DAV methods.
# Same deal with Apple's DAV filesystem and Gnome VFS support for DAV.
#
BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
BrowserMatch "^WebDrive" redirect-carefully
BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully
BrowserMatch "^gnome-vfs" redirect-carefully

Zitat von sysconfig.d/global.conf

#
# Files in this directory are created at apache start time by /usr/sbin/rcapache2
# Do not edit them!
#

# see /etc/sysconfig/apache2

Timeout 300
ServerSignature on
ServerAdmin root@dhcppc0
ServerName apache2
UseCanonicalName off
ServerTokens OS
LogLevel warn
CustomLog /var/log/apache2/access_log combined

[robo47]

liest du überhaupt deine eigenen Fehlermeldungen ?

Starting httpd2 (prefork) Syntax error on line 135 of /etc/apache2/server-tuning.conf

da bringt mir die httpd conf wenig

/edit, ups hab die anderen dateien da drunter ned gesehen ich schaus mir an

[robo47]

hast du bei den Dateien schon was gelöscht? wo in welcher Datei steht der LogFormat kram, poste mal bitte noch die /etc/apache2/uid.conf Datei.

mfg
robo47

[Jan]

Da steht nur drin :

User wwwrun
Group www

Zitat von mod_log_config.conf

#
# The following directives define some format nicknames for use with
# a CustomLog directive.
#
# http://httpd.apache.org/docs-2.2/mod...og_config.html
#

#
# Format string: Nickname:
#
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%v %h %l %u %t \"%r\" %>s %b" vhost_common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
LogFormat "%h %l %u %t \"%r\" %>s %b \
\"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%v %h %l %u %t \"%r\" %>s %b \
\"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined

# To use %I and %O, you need to enable mod_logio
<IfModule mod_logio.c>
LogFormat "%h %l %u %t \"%r\" %>s %b \
\"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>

# Use one of these when you want a compact non-error SSL logfile on a virtual
# host basis:
<IfModule mod_ssl.c>
Logformat "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \
\"%r\" %b" ssl_common
Logformat "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \
\"%r\" %b \"%{Referer}i\" \"%{User-Agent}i\"" ssl_combined
</IfModule>

[CIX88]

Von Suse habe ich Null Ahnung, aber ist es möglich, dass ein Modul nicht geladen wurde ?

Weis nicht, ob es dir wirklich hilft:
http://www.unixboard.de/vb3/archive/...p/t-16879.html

[robo47]

tjoa ich würde dir empfehlen, schritt für schritt durchzugehen, erstmal alle includes auskommentieren, schauen ob er startet, dann schritt für schritt die includes dazu, dann findest du raus in welcher datei genau das problem ist, dann sobald ud das weist, in der datei schritt für schrit auskommentieren bis es geht., ne ferndiagnose ist hier einfach mist

[Jan]

So, hier mal die editierte httpd.conf

#
# /etc/apache2/httpd.conf 
#
# This is the main Apache server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs-2.2/> for detailed information about
# the directives.

# Based upon the default apache configuration file that ships with apache,
# which is based upon the NCSA server configuration files originally by Rob
# McCool. This file was knocked together by Peter Poeml <poeml+apache@suse.de>.

# If possible, avoid changes to this file. It does mainly contain Include
# statements and global settings that can/should be overridden in the
# configuration of your virtual hosts.

# Quickstart guide:
# /usr/share/doc/packages/apache2/README.QUICKSTART


# Overview of include files, chronologically:
#
# httpd.conf
#  | 
#  |-- uid.conf  . . . . . . . . . . . . . .  UserID/GroupID to run under
#  |-- server-tuning.conf  . . . . . . . . .  sizing of the server (how many processes to start, ...)
#  |-- sysconfig.d/loadmodule.conf . . . . .[*] load these modules
#  |-- listen.conf . . . . . . . . . . . . .  IP adresses / ports to listen on
#  |-- mod_log_config.conf . . . . . . . . .  define logging formats
#  |-- sysconfig.d/global.conf . . . . . . .[*] server-wide general settings
#  |-- mod_status.conf . . . . . . . . . . .  restrict access to mod_status (server monitoring)
#  |-- mod_info.conf . . . . . . . . . . . .  restrict access to mod_info
#  |-- mod_usertrack.conf  . . . . . . . . .  defaults for cookie-based user tracking
#  |-- mod_autoindex-defaults.conf . . . . .  defaults for displaying of server-generated directory listings
#  |-- mod_mime-defaults.conf  . . . . . . .  defaults for mod_mime configuration
#  |-- errors.conf . . . . . . . . . . . . .  customize error responses
#  |-- ssl-global.conf . . . . . . . . . . .  SSL conf that applies to default server _and all_ virtual hosts
#  |
#  |-- default-server.conf . . . . . . . . .  set up the default server that replies to non-virtual-host requests
#  |    |--mod_userdir.conf  . . . . . . . .  enable UserDir (if mod_userdir is loaded)
#  |    `--conf.d/apache2-manual?conf  . . .  add the docs ('?' = if installed)
#  |
#  |-- sysconfig.d/include.conf  . . . . . .[*] your include files 
#  |                                             (for each file to be included here, put its name 
#  |                                              into APACHE_INCLUDE_* in /etc/sysconfig/apache2)
#  |
#  `-- vhosts.d/ . . . . . . . . . . . . . .  for each virtual host, place one file here
#       `-- *.conf . . . . . . . . . . . . .     (*.conf is automatically included)
#
#
# Files marked[*] are created from sysconfig upon server restart: instead of
# these files, you edit /etc/sysconfig/apache2



#  Filesystem layout:
#
# /etc/apache2/
#  |-- charset.conv  . . . . . . . . . . . .  for mod_auth_ldap
#  |-- conf.d/
#  |   |-- apache2-manual.conf . . . . . . .  conf that comes with apache2-doc
#  |   |-- mod_php4.conf . . . . . . . . . .  (example) conf that comes with apache2-mod_php4
#  |   `-- ... . . . . . . . . . . . . . . .  other configuration added by packages
#  |-- default-server.conf
#  |-- errors.conf
#  |-- httpd.conf  . . . . . . . . . . . . .  top level configuration file
#  |-- listen.conf
#  |-- magic
#  |-- mime.types -> ../mime.types
#  |-- mod_autoindex-defaults.conf
#  |-- mod_info.conf
#  |-- mod_log_config.conf
#  |-- mod_mime-defaults.conf
#  |-- mod_perl-startup.pl
#  |-- mod_status.conf
#  |-- mod_userdir.conf
#  |-- mod_usertrack.conf
#  |-- server-tuning.conf
#  |-- ssl-global.conf
#  |-- ssl.crl/  . . . . . . . . . . . . . .  PEM-encoded X.509 Certificate Revocation Lists (CRL)
#  |-- ssl.crt/  . . . . . . . . . . . . . .  PEM-encoded X.509 Certificates
#  |-- ssl.csr/  . . . . . . . . . . . . . .  PEM-encoded X.509 Certificate Signing Requests
#  |-- ssl.key/  . . . . . . . . . . . . . .  PEM-encoded RSA Private Keys
#  |-- ssl.prm/  . . . . . . . . . . . . . .  public DSA Parameter Files
#  |-- sysconfig.d/  . . . . . . . . . . . .  files that are created from /etc/sysconfig/apache2
#  |   |-- global.conf
#  |   |-- include.conf
#  |   `-- loadmodule.conf
#  |-- uid.conf
#  `-- vhosts.d/ . . . . . . . . . . . . . .  put your virtual host configuration (*.conf) here
#      |-- vhost-ssl.template
#      `-- vhost.template



### Global Environment ######################################################
#
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests.

# run under this user/group id
Include /etc/apache2/uid.conf

# - how many server processes to start (server pool regulation)
# - usage of KeepAlive
#Meine Edit
# Include /etc/apache2/server-tuning.conf

# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog /var/log/apache2/error_log

# generated from APACHE_MODULES in /etc/sysconfig/apache2
Include /etc/apache2/sysconfig.d/loadmodule.conf

# IP addresses / ports to listen on
Include /etc/apache2/listen.conf

# predefined logging formats
#Meine Edit
# Include /etc/apache2/mod_log_config.conf

# generated from global settings in /etc/sysconfig/apache2
#Meine Edit
# Include /etc/apache2/sysconfig.d/global.conf

# optional mod_status, mod_info
Include /etc/apache2/mod_status.conf
Include /etc/apache2/mod_info.conf

# optional cookie-based user tracking
# read the documentation before using it!!
Include /etc/apache2/mod_usertrack.conf

# configuration of server-generated directory listings
Include /etc/apache2/mod_autoindex-defaults.conf

# associate MIME types with filename extensions
#Meine Edit
# TypesConfig /etc/apache2/mime.types
#Meine Edit
# DefaultType text/plain
#Meine Edit
# Include /etc/apache2/mod_mime-defaults.conf

# set up (customizable) error responses
#Meine Edit
# Include /etc/apache2/errors.conf

# global (server-wide) SSL configuration, that is not specific to 
# any virtual host
Include /etc/apache2/ssl-global.conf

# forbid access to the entire filesystem by default
<Directory />
    Options None
    AllowOverride None
#Meine Edit
#     Order deny,allow
#Meine Edit
#     Deny from all
</Directory>

# use .htaccess files for overriding,
AccessFileName .htaccess
# and never show them
<Files ~ "^\.ht">
#Meine Edit
#     Order allow,deny
#Meine Edit
#    Deny from all
</Files>

# List of resources to look for when the client requests a directory
#Meine Edit
# DirectoryIndex index.html index.html.var

### 'Main' server configuration #############################################
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#
#Meine Edit 
#Include /etc/apache2/default-server.conf


# Another way to include your own files
#
# The file below is generated from /etc/sysconfig/apache2,
# include arbitrary files as named in APACHE_CONF_INCLUDE_FILES and
# APACHE_CONF_INCLUDE_DIRS
#Meine Edit Include /etc/apache2/sysconfig.d/include.conf


### Virtual server configuration ############################################
#
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at
# <URL:http://httpd.apache.org/docs-2.2/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.
#
Include /etc/apache2/vhosts.d/*.conf


# Note: instead of adding your own configuration here, consider 
#       adding it in your own file (/etc/apache2/httpd.conf.local)
#       putting its name into APACHE_CONF_INCLUDE_FILES in 
#       /etc/sysconfig/apache2 -- this will make system updates 
#       easier :-)

Das Problem ist, mein Browser zeigt mir jetzt sogar den HTML Quellcode an.
Apache läuft jetzt zwar, aber er macht NICHTS. Er ist jetzt lediglich ein Verzeichnis, das ich über meine IP aufrufen kann.

[robo47]

ja blub ich hab doch gesagt du musst jetzt SELBST schritt für schritt die includes wieder freischalten und schauen ab wann es wo probleme gibt und dann in der datei schauen wo das problem genau liegt.